Air Flow Control was developed at New Holland Rochester by Jim Straeter to provide a higher level of performance in the self-leveling shoe. In the original design of the Self Leveling Shoe, air is allowed to escape in different ways within the shoe, preventing proper air flow in the cleaning process.
Tests of this design over thousands of acres have shown superior performance of the shoe with the Air Flow Control compared to the standard shoe. The Air Flow Control aids performance over the entire range of fan speeds and capacity needs. Consistently, machines with the Air Flow Control show lower loss levels and improved samples.
The Air Flow Control offers a relatively simple and less expensive method of improving the Self-Leveling Shoe performance, and it is available now!
Air Flow Control II Instruction Pictures:
Auger Covers
Auger Support Bolt
Debris Shield
Divider Slot Location
Divider Walls Temporarily Placed
Front and Rear Seal Joint
Front Seal
Front View of Seal Brackets
Housing Hole Template
Keystock Clearance Check
Left Brackets Mounted with Seal Surface
Left Front Seal Mounted
Left Rear Seal Surface Support Rear Bolt
Left Rear Shields
Left Seal Surface Install Position
Leveling Shoe Monitor
Lower Seal and Support
Lower Seal 1 Bracket
Lower Seal 2 Bracket
Lower Seal 3 Bracket
Lower Seal 4 Bracket
Lower Seal 5 Bracket
Lower Shoe Travel Measurement
Monitor Set for Shoe Level
Plywood in Shoe
Rear Seal Mount on Frame
Rear Seal Mount Position
Rear Seal Right and Left
Right Access Hole
Right Rear Seal Mount Assembled
Right Rear Seal Mount on Frame 1
Right Seal Surface Tailings Cover Mount
RIght Seals and Surface Correctly Installed
Seal Mounts on Frame
Shoe Pivot Stop Bolt
Seive Baffle Installed
Tailings Auger Cover
Tailings Auger Cover Bolt
Tailings Divider
Triangle Access Cover and Counter Plate Installed
Triangle Access Cover Outside
Upper Seal Installed
Air Flow Control II Parts Pictures
Access Cover Counter Plate
Access Cover Plate
Center Cover Support
Clamp Strap
Debris Shield
Inner Counter Plate
Inner Seal
Joint Counter Plate
Left Auger Cover
Left Seal Mount with Counter Plates
Left Front Seal
Left Front Seal Mount with Clamp Straps
Left Seal Surface
Lower Counter Plate
Lower Seal Bracket
Lower Seal Support
Lower Seal
Rear Seal (right and left 2)
Rear Seal Mount Counter Plate
Reinforcing Strip
Right Auger Cover
Right Front Seal Mount with Clamp Straps
Right Front Seal
Right Rear Seal Mounts with Clamp Straps
Right Seal Surface
Seive Baffle
Tailings Auger Cover
Top Counter Plate
Upper Seal left and right
Vertical Seal left and right
We use cookies to give you the best online experience. By agreeing you accept the use of cookies in accordance with our cookie policy.
