Awaiting product image

Woods Shield Bearing Part # 19846

$12.75

KIT, MISC

Only 1 left in stock (can be backordered)

Log in to save this item to a Saved Cart.

WARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov

SKU: 19846 Category:

Description

Part #: 19846

Models Used On

Woods
B (5)
B214-7 Batwing (Front Constant Velocity Drive 540 RPM (1-3/8" 6-Tooth))
B214R-7 Batwing (Front Constant Velocity Drive 540 RPM (1-3/8" 6-Tooth))
B214RQ-7 Batwing (Front Constant Velocity Drive 1000 RPM (1-3/8" 21-Tooth))
B320-7 Batwing (Front Constant Velocity Drive 540 RPM (1-3/8" 6-Tooth))
B320Q-7 Batwing (Front Constant Velocity Drive 1000 RPM (1-3/8" 21-Tooth))
BATWING (16)
2120 Batwing (Front Constant Velocity Drive (Optional) 1-3/8" 6-Tooth 540 RPM; Wing Assembly (Left Wing); Wing Assembly (Right Wing))
2120-2 Batwing (Front Constant Velocity Drive (Optional) (1-3/4" 20-Tooth 1000 RPM); Front Constant Velocity Drive (Optional) (1-3/8" 21-Tooth 1000 RPM); Front Constant Velocity Drive (Optional) (1-3/8" 6-Tooth 540 RPM))
2120-3 Batwing (Front Constant Velocity Drive (Optional) (Before S/N 852844) 1-3/4inch. (20-Tooth) 1000 RPM; Front Constant Velocity Drive (Optional) (Before S/N 852844) 1-3/8inch (6-Tooth) 540 RPM; Front Constant Velocity Drive (Optional) (Before S/N 852844) 1-3/8inch. (21-Tooth) 1000 RPM)
2120Q Batwing (Front Constant Velocity Drive (Optional) 1-3/4" 20-Tooth 1000 RPM; Front Constant Velocity Drive (Optional) 1-3/8" 21-Tooth 1000 RPM; Wing Assembly (Left Wing); Wing Assembly (Right Wing))
2120Q-2 Batwing (Front Constant Velocity Drive (Optional) (1-3/4" 20-Tooth 1000 RPM); Front Constant Velocity Drive (Optional) (1-3/8" 21-Tooth 1000 RPM); Front Constant Velocity Drive (Optional) (1-3/8" 6-Tooth 540 RPM))
2120Q-3 Batwing (Front Constant Velocity Drive (Optional) (Before S/N 852844) 1-3/4inch. (20-Tooth) 1000 RPM; Front Constant Velocity Drive (Optional) (Before S/N 852844) 1-3/8inch (6-Tooth) 540 RPM; Front Constant Velocity Drive (Optional) (Before S/N 852844) 1-3/8inch. (21-Tooth) 1000 RPM)
2162L Batwing (Front CV Drive (Optional) (Before S/N 853791) 1-3/8" 6-Tooth (540 RPM))
2162R Batwing (Front CV Drive (Optional) (Before S/N 853791) 1-3/8" 6-Tooth (540 RPM))
3180 Batwing (Front Constant Velocity Drive (Optional) 1-3/8" 6-Tooth 540 RPM; Wing Assembly (Left Wing); Wing Assembly (Right Wing))
3180-2 Batwing (Front Constant Velocity Drive (Optional) (1-3/4" 20-Tooth 1000 RPM); Front Constant Velocity Drive (Optional) (1-3/8" 21-Tooth 1000 RPM); Front Constant Velocity Drive (Optional) (1-3/8" 6-Tooth 540 RPM))
3180-3 Batwing (Front Constant Velocity Drive (Optional) (Before S/N 852844) 1-3/4inch. (20-Tooth) 1000 RPM; Front Constant Velocity Drive (Optional) (Before S/N 852844) 1-3/8inch (6-Tooth) 540 RPM; Front Constant Velocity Drive (Optional) (Before S/N 852844) 1-3/8inch. (21-Tooth) 1000 RPM)
3180Q Batwing (Front Constant Velocity Drive (Optional) 1-3/4" 20-Tooth 1000 RPM; Front Constant Velocity Drive (Optional) 1-3/8" 21-Tooth 1000 RPM; Wing Assembly (Left Wing); Wing Assembly (Right Wing))
3180Q-2 Batwing (Front Constant Velocity Drive (Optional) (1-3/4" 20-Tooth 1000 RPM); Front Constant Velocity Drive (Optional) (1-3/8" 21-Tooth 1000 RPM); Front Constant Velocity Drive (Optional) (1-3/8" 6-Tooth 540 RPM))
3180Q-3 Batwing (Front Constant Velocity Drive (Optional) (Before S/N 852844) 1-3/4inch. (20-Tooth) 1000 RPM; Front Constant Velocity Drive (Optional) (Before S/N 852844) 1-3/8inch (6-Tooth) 540 RPM; Front Constant Velocity Drive (Optional) (Before S/N 852844) 1-3/8inch. (21-Tooth) 1000 RPM)
3240 Batwing (Front CV Drive (Optional) (Before S/N 853791) 1-3/8" 6-Tooth (540 RPM))
3240Q Batwing (Front CV Drive (Optional) (Before S/N 853791) 1-3/4 20-Tooth (1000 RPM); Front CV Drive (Optional) (Before S/N 853791) 1-3/4" 20-Tooth (1000 RPM))
FLAIL (11)
FLAIL SHREDDER WITH FRONT & REAR CASTERS S20CD (TYPE A – WEASLER 24K PULL-TYPE PTO SHAFT WITH TORQMASTER CLUTCH S20CD, SC22CD, S25CD, S27CD PULL-TYPE MODELS; TYPE B – WEASLER 24K PULL-TYPE PTO SHAFT WITH TORQMASTER CLUTCH S20CD, SC22CD, S25CD, S27CD PULL-TYPE MODELS; WEASLER 24K 2-POINT & 3-POINT PTO SHAFT WITH TORQMASTER CLUTCH S20CD, SC22CD, S25CD, S27CD 3-POINT MODELS)
FLAIL SHREDDER WITH FRONT & REAR CASTERS S22CD (TYPE A – WEASLER 24K PULL-TYPE PTO SHAFT WITH TORQMASTER CLUTCH S20CD, SC22CD, S25CD, S27CD PULL-TYPE MODELS; TYPE B – WEASLER 24K PULL-TYPE PTO SHAFT WITH TORQMASTER CLUTCH S20CD, SC22CD, S25CD, S27CD PULL-TYPE MODELS; WEASLER 24K 2-POINT & 3-POINT PTO SHAFT WITH TORQMASTER CLUTCH S20CD, SC22CD, S25CD, S27CD 3-POINT MODELS)
FLAIL SHREDDER WITH FRONT & REAR CASTERS S25CD (TYPE A – WEASLER 24K PULL-TYPE PTO SHAFT WITH TORQMASTER CLUTCH S20CD, SC22CD, S25CD, S27CD PULL-TYPE MODELS; TYPE B – WEASLER 24K PULL-TYPE PTO SHAFT WITH TORQMASTER CLUTCH S20CD, SC22CD, S25CD, S27CD PULL-TYPE MODELS; WEASLER 24K 2-POINT & 3-POINT PTO SHAFT WITH TORQMASTER CLUTCH S20CD, SC22CD, S25CD, S27CD 3-POINT MODELS)
FLAIL SHREDDER WITH FRONT & REAR CASTERS S27CD (TYPE A – WEASLER 24K PULL-TYPE PTO SHAFT WITH TORQMASTER CLUTCH S20CD, SC22CD, S25CD, S27CD PULL-TYPE MODELS; TYPE B – WEASLER 24K PULL-TYPE PTO SHAFT WITH TORQMASTER CLUTCH S20CD, SC22CD, S25CD, S27CD PULL-TYPE MODELS; WEASLER 24K 2-POINT & 3-POINT PTO SHAFT WITH TORQMASTER CLUTCH S20CD, SC22CD, S25CD, S27CD 3-POINT MODELS)
Flail Shredder Center Drive (WEASLER(TM) 21K 2-Point & 3-Point PTO Shaft With Torqmaster Clutch; WEASLER(TM) 21K Pull-Type PTO Shaft With Torqmaster Clutch; WEASLER(TM) 24K 2-Point & 3-Point PTO Shaft With Torqmaster Clutch; WEASLER(TM) 24K Pull-Type PTO Shaft With Torqmaster Clutch)
Flail Shredder End Drive & Vertical Fold (Weasler 3-Point Pto Shaft; Weasler PTO Shaft, Cat 5, Vertical Fold, Carrier Bearing To Tractor; Weasler Secondary Driveline (Vertical Fold Shredder); Weasler Wing Driveline With Clutch (Vertical Fold Shredder))
Flail Shredder S15CD (TYPE A – WEASLER® 24K Pull-Type PTO Shaft With Torqmaster Clutch; TYPE B – WEASLER® 24K PULL-TYPE PTO SHAFT WITH TORQMASTER CLUTCH; WEASLER® 24K 2-Point & 3-Point PTO Shaft With Torqmaster Clutch)
Flail Shredder S20CD (TYPE A – WEASLER® 24K Pull-Type PTO Shaft With Torqmaster Clutch; TYPE B – WEASLER® 24K PULL-TYPE PTO SHAFT WITH TORQMASTER CLUTCH; WEASLER® 24K 2-Point & 3-Point PTO Shaft With Torqmaster Clutch)
Flail Shredder S22CD (TYPE A – WEASLER® 24K Pull-Type PTO Shaft With Torqmaster Clutch; TYPE B – WEASLER® 24K PULL-TYPE PTO SHAFT WITH TORQMASTER CLUTCH; WEASLER® 24K 2-Point & 3-Point PTO Shaft With Torqmaster Clutch)
Flail Shredder S25CD (TYPE A – WEASLER® 24K Pull-Type PTO Shaft With Torqmaster Clutch; TYPE B – WEASLER® 24K PULL-TYPE PTO SHAFT WITH TORQMASTER CLUTCH; WEASLER® 24K 2-Point & 3-Point PTO Shaft With Torqmaster Clutch)
Flail Shredder S27CD (TYPE A – WEASLER® 24K Pull-Type PTO Shaft With Torqmaster Clutch; TYPE B – WEASLER® 24K PULL-TYPE PTO SHAFT WITH TORQMASTER CLUTCH; WEASLER® 24K 2-Point & 3-Point PTO Shaft With Torqmaster Clutch)
HD (4)
HD210R-5 S/N 3500 & Up Batwing (80 Deg. Front Constant Velocity Drive (Optional) (1-3/8" 21-Tooth 1000 RPM); 80 Deg. Front Constant Velocity Drive (Optional) (1-3/8" 6-Tooth 540 RPM))
HD210RQ-5 S/N 3500 & Up Batwing (80 Deg. Front Constant Velocity Drive (Optional) (1-3/8" 21-Tooth 1000 RPM); 80 Deg. Front Constant Velocity Drive (Optional) (1-3/8" 6-Tooth 540 RPM))
HD315-5 S/N 13000 & Up Batwing (80 Deg. Front Constant Velocity Drive (Optional) (1-3/8" 21-Tooth 1000 RPM); 80 Deg. Front Constant Velocity Drive (Optional) (1-3/8" 6-Tooth 540 RPM))
HD315Q-5 S/N 5000 & Up Batwing (80 Deg. Front Constant Velocity Drive (Optional) (1-3/8" 21-Tooth 1000 RPM); 80 Deg. Front Constant Velocity Drive (Optional) (1-3/8" 6-Tooth 540 RPM))
LQ (1)
2162LQ Batwing (Front CV Drive (Optional) (Before S/N 853791) 1-3/4 20-Tooth (1000 RPM); Front CV Drive (Optional) (Before S/N 853791) 1-3/4" 20-Tooth (1000 RPM))
MD (3)
MD315-5 S/N 13000 & Up Batwing (80 Deg. Front Constant Velocity Drive (Optional) (1-3/8" 21-Tooth 1000 RPM); 80 Deg. Front Constant Velocity Drive (Optional) (1-3/8" 6-Tooth 540 RPM))
MD315Q-5 Batwing (80 Deg. Front Constant Velocity Drive (Optional) (1-3/8" 21-Tooth 1000 RPM); 80 Deg. Front Constant Velocity Drive (Optional) (1-3/8" 6-Tooth 540 RPM))
MD315Q-5 S/N 5000 & Up Batwing (80 Deg. Front Constant Velocity Drive (Optional) (1-3/8" 21-Tooth 1000 RPM); 80 Deg. Front Constant Velocity Drive (Optional) (1-3/8" 6-Tooth 540 RPM))
MULTI (4)
214-3 Multi-Spindle (Front Constant Velocity Drive 1-3/8" 21-Tooth (1000 RPM); Front Constant Velocity Drive 1-3/8" 6-Tooth (540 RPM))
214Q-3 Multi-Spindle (Front Constant Velocity Drive 1-3/8" 21-Tooth (1000 RPM); Front Constant Velocity Drive 1-3/8" 6-Tooth (540 RPM))
3168 Multi-Spindle (Front Constant Velocity Drive – S/N 818864 & Before (1-3/8inch. 6-Tooth) 540 RPM)
3168Q Multi-Spindle (Front Constant Velocity Drive – S/N 818864 & Before (1-3/4inch. 20-Tooth) 1000 RPM; Front Constant Velocity Drive – S/N 818864 & Before (1-3/8inch. 21-Tooth) 1000 RPM)
RQ (1)
2162RQ Batwing (Front CV Drive (Optional) (Before S/N 853791) 1-3/4 20-Tooth (1000 RPM); Front CV Drive (Optional) (Before S/N 853791) 1-3/4" 20-Tooth (1000 RPM))

Disclaimer: This is a list of models where this part is listed in the parts catalog. It does not guarantee fitment for your specific machine. Please contact us to verify for certain if needed.

Additional information

Manufacturer

Woods

Reviews

There are no reviews yet.

Be the first to review “Woods Shield Bearing Part # 19846”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Assembly Schemes

No Items.

Related products